To aid in the selection of antenna cable connectors, Connect802 provides the following connector pictures and descriptions. When ordering custom cables, please carefully study the pictures below to confirm that the cables you order will be the cables you need. Custom cables are not returnable. If you are in doubt, please contact your sales representative with the equipment model number to which you are attaching, and/or photographs of the connectors to which you are mating. (Include a coin or ruler in any photograph as a scale reference). All connectors are assumed to be Standard Thread (right-hand tightening) unless otherwise specified. NO RETURNS ARE ACCEPTED ON CUSTOM CABLE ORDERS
All connectors ordered through Connect802 are assumed to be 'standard thread' (right-hand tightening). There are special-purpose RF cable connectors that are 'reverse threaded' (right-hand loosening). These special purpose, reverse-threaded connectors are specialty items and are not normally used for any purpose relative to Wi-Fi, WiMAX, or similar microwave radio devices. You can confirm that your existing threaded connectors use standard threading by confirming that they tighten when rotated clockwise (right-hand tightening).