The On-Site Gallery

All photographs on this page were taken by Connect802 employees during on-site spectrum analysis, Wi-Fi site survey engagements and on-site installation projects.

Call today and ask about your 30% design discount when you buy a Wi-Fi wireless network from Connect802

On-Site 802.11 Wi-Fi Wireless LAN Site Survey, Wireless VoIP Site Survey, Medical Computer-on-Wheels Wi-Fi Site Survey and Full On-Site RF Engineering and Installation Services

We are the experts at providing on-site WLAN site survey, engineering and installation service across the United States. Since 1994, we've been committed to the highest levels of professionalism, excellence, and customer satisfaction. We're a hard-working team that will get the job done for you with integrity and technical mastery.

Connect802 is your on-site survey and engineering partner!

Do you need...

a certified WLAN engineer to perform Wi-Fi site surveys?
a wireless LAN site survey?
802.11 Wi-Fi on-site installation services?
On-site RF spectrum analysis?
RF site survey services for post-installation site verification?
an 802.11 Wi-Fi site survey in a hospital, warehouse, manufacturing facility, or containerized cargo shipping port?
any on-site RF spectrum analysis, wireless LAN site survey, or RF engineering or troubleshooting?

We've Got You Covered !


Working with the U.S. Federal Government, Connect802 on-site engineers perform wireless LAN site survey and equipment testing on the East Coast.	Medical computer-on-wheels carts demand special Wi-Fi on-site wireless LAN survey techniques. Here, our on-site engineer performs on-site RF measurement in a hospital. Connect802 has provided Wi-Fi site survey services for the nation's largest private healthcare provider since 2006.	As part of a hospital RF wireless LAN site survey we tested the effect of active x-ray equipment in the radiology department.


Our on-site calibration survey equipment (the antenna in the foreground) is seen in the partially constructed high-rise MDU. The Connect802 site survey work provided connectivity in this building with significant poured concrete construction.	Our on-site RF spectrum analysis equipment is seen in a partially constructed MRI room. Notice the copper sheeting covering the floors and back wall. Connect802 has performed wireless LAN site surveys in the most challenging environments.	On the roof of one of the buildings at a 140 acre Hollywood film outdoor location shoot area near Malibu, California, Connect802 is performing an outdoor Wi-Fi site survey for a mesh router system.


A Connect802 field engineer performs antenna alignment during an outdoor 802.11 wireless LAN site survey and system setup for the United States Geological Survey.	In this partially constructed operating room facility in a newly constructed hospital, Connect802 works with biomed engineers to confirm the RF compatibility between 802.11 transmitters and the biomed equipment in Los Angeles.	802.11 Wi-Fi wireless LAN site surveys often involve inspecting the physical characteristics of a site.


During an on-site Wi-Fi site survey engagement for a warehouse and manufacturing facility the Connect802 on-site RF engineer took the test transmitter equipment up on a lift to perform the survey measurements in a realistic environment in Wisconsin.	In addition to design and on-site wireless LAN site survey services, Connect802 provides complete installation services nationwide. Our installation technicians hold appropriate local licenses and can work with you when you need Wi-Fi equipment installed. Here, our on-site installer is cabling a rooftop radio unit in Denver.	Here, the Connect802 team is installing a multi-building, point-to-multipoint outdoor wireless system. We can dispatch an installation team from over 200 locations across the United States.


Unlike your typical value-added Cisco wireless LAN site survey and resale company (or other manufacturers Wi-Fi survey and resale company), Connect802 is a true RF engineering company. The picture shows our pair of Anritsu spectrum analyzers during an on-site troubleshooting engagement for a 600 MHz wireless medical telemetry system (WMTS) used for patient monitoring in a hospital in Oregon.	You won't find the typical Cisco Systems or Aruba Networks certified wireless LAN site survey company sending RF engineers out to do site survey and testing for a veterinary medical imaging system in Ohio. Here, Connect802 is testing the feasibility of using an 802.11n point-to-point link to transmit real-time equine ultrasound images.	Connect802 goes beyond the conventional 802.11 Wi-Fi wireless LAN site survey. The photo is from in-lab testing we performed to determine the reality of the antenna propagation pattern provided by Cisco Systems for one of its access points.


This Connect802 engineer is performing an on-site RF spectrum analysis site survey at a major frozen food manufacturing facility.	This Connect802 engineer is doing on-site 802.11 site survey confirmation of connectivity in a truck inspection station in Florida as part of a Homeland Security regulatory compliance requirement.	Our engineer (up in the bucket truck) is doing 802.11a and 802.11b/g on-site wireless LAN survey and troubleshooting work for the New York City Transit Authority in a bus lot in the Bronx.

The Contents Of This Website Are Subject To Copyright - Unauthorized Reproduction Prohibited